- #Pololu maestro control center for mac drivers#
- #Pololu maestro control center for mac driver#
- #Pololu maestro control center for mac full#
- #Pololu maestro control center for mac Pc#
Next, connect your PC to your Maestro via a USB Cable. Check to make sure that the LED located farthest left on the front of the Maestro is lit. Ideally, you should use an electrical outlet that has nothing else plugged into it.
Connect ONLY the Brown Innovations Power Supply- DO NOT MAKE ANY OTHER CONNECTIONS AT THIS TIME. Unplug any connections that you may have previously made. Remove the back panel (as illustrated in section 3.2). Next, connect your PC to your Maestro via a USB Cable.Ĥ.4 Connecting the Maestro to Your Computer Check to make sure that the LED located farthest left on the front of the Maestro directional speaker is lit. Connect ONLY the Brown Innovations Power Supply-DO NOT MAKE ANY OTHER CONNECTIONS AT THIS TIME.
4.4 Connecting the Maestro to Your Computer Remove the back panel (as illustrated in section 3.2).
#Pololu maestro control center for mac drivers#
Please select the ‘View Readme.rtf’ to review important information about your directional speaker. Click ‘Finish.’ Once the software and the drivers are installed, you can connect the Maestro Speaker to your computer.
#Pololu maestro control center for mac driver#
This will take you through the Baton software and Maestro driver installation procedure.Īt this time, you have successfully installed the Maestro System. Insert the Maestro CD and open the ‘Setup’ folder. If at any time you have questions about this procedure, please don’t hesitate to contact us.Ĥ.3 Installing the Maestro System Softwareīefore you connect the directional speaker to your PC, you will need to pre-install the drivers and the Baton software. Please read through the following, step-by-step instructions carefully.
If you do not have a USB 2.0 port on your computer, they are readily available at most retailers that carry computer accessories. Baton was designed as an intuitive graphic user interface that lets you monitor several aspects of the Maestro’s operation and adjust these aspects according to your specific needs. These will be referred to as the Maestro System. The following chapter will explain loading the Baton software and Maestro drivers onto your PC. The simplest way to make adjustments is with the Baton software that is included with your speaker. Your directional speaker can be easily adjusted to suit individual applications. As a rough guide for setting the Volume Offset refer to the figure below.Ĭhapter 4. A good way to test your Volume Offset is to walk backward away from the Maestro and see at which point the Maestro audio blends into the noise of the environment. Volume Offset should be set at a time when there is an average to high level of ambient noise. Remember this is the outer edge of your sound field, within it the track will be perfectly audible. Raise or lower the Volume Offset to a level that is just above the surrounding ambient noise. To set this distance: Have a test subject stand at the maximum distance of the desired sound field. How high the Volume Offset is set will dictate how far from the Maestro the sound is focused. As the ambient noise level changes the Maestro will adjust automatically, providing a constant intelligible sound field a predetermined distance from the Maestro.The directional audio volume of the Maestro raises and lowers depending on the ambient level of the surrounding environment.The two basic concepts that need to be understood when setting Volume Offset are: This is done using the potentiometer, or pot, marked ‘Volume’ on the back panel of your directional speaker. The only thing you need to set in Stand Alone Mode is the Volume Offset. Audio compression and active loudness ensure that your audio presentation is heard clearly when ambient noise levels around the presentation change.īe sure that you have the following before you begin setting-up your directional speaker:
#Pololu maestro control center for mac full#
Seven separate speakers are used to direct and provide full fidelity audio reproduction. A discreet, built-in omni-directional microphone monitors the ambient noise levels in the surrounding area and a microcontroller automatically adjusts the volume of directional sound. The Maestro is a compact powered directional speaker system that incorporates a substantial amount of high-tech features. The Maestro can be easily networked and communicated with remotely. This product has been designed for flexibility of use and ease of installation use the default settings built into the speaker or customize the Maestro’s responses using the Baton software. The Maestro is a state of the art intelligent directional speaker that adapts to its operating environment.
0 kommentar(er)
